QuietStove.com

Showing posts with label best gas cold. Show all posts
Showing posts with label best gas cold. Show all posts

Monday, March 19, 2012

Canisters, Cold, and Altitude: Gas in a Nutshell

OK, so here's the deal on canisters in cold weather and at higher elevations, in step-by-step form:

1.  Choose good gas.  For weather below 50°F/10°C, avoid butane mixes. Get an isobutane mix.  I've got all the major US brands sized up on my blog in What's the Best Brand of Gas for Cold Weather?  Above 50°F/10°C, it typically doesn't matter what brand or blend you buy.

2.  Know your limits.  Canisters containing isobutane mixes work reasonably well down to about 20F/-7C at sea level throughout the life of the canister if you use good gas (see item #1, above) and good technique (see item #4, below).  Now, that's just a number, which isn't a bad number if you just want the short version, but if you want to know more about that number, how I came up with it, and how to plan using it, see Gas Stoves: How Cold Can I Go?  Canisters get colder as you use them (canister "chilling") which can negatively impact performance.  See item #4, below, for how to compensate for canister chilling.

3.  Adjust for Altitude.  The higher you go, the lower the outside pressure.  The lower the outside pressure, the colder you can operate a canister gas stove.  You receive approximately a 1F per 1000' of gain colder advantage (about 0.5°C per 300m gain).  The idea that canister gas stoves don't work well at altitude is a myth.

4.  Use good technique.  Basically, start with a warm canister and keep the canister warm.  For "best practices," see Cold Weather Tips for Gas Stoves.

Now, in the above, I'm speaking primarily about "regular" gas stoves, the kind that screw right on to the top of a canister.  If you have a remote canister stove that is capable of inverted operation (see my Stoves for Cold Weather II article in Seattle Backpacker's Magazine for more information), then the limit in item #2, above, changes from about 20°F/-7°C to about 0°F/-18°C.  All of the other items still typically apply.  If you want to go out in weather that is that cold, I strongly suggest you do your homework, part of which should be to read Gas Stoves: How Cold Can I Go?

There, in the proverbial "nutshell," is how to deal with cold weather and adjust for altitude for canister gas stoves.

HJ

Related articles and posts:

Thursday, December 29, 2011

100% Propane for Backpacking? YES!

What's the "holy grail" of canister gas for cold weather backpacking?  100% propane.  Propane is the best.  Plain butane won't vaporize below 31F/-0.5C.  Even isobutane just sits there and looks at you below 11F/-12C.  But propane?  Propane vaporizes all the way down to -44F/-42C.  Sweet!

What's that you say?  Propane is only available in those big heavy steel cylinders that are 16.4oz/465g net weight?  And the total weight is even more than that?  And you're not about to carry that on your back?

Hey, I'm with you.  Don't blame you a bit.  Those big green steel cylinders are just impractical for backpacking.  Too bulky, too heavy, and the stoves that go with them aren't any better.  But what if there were a better way?

Introducing the Bernzomatic Power Cell.
A Bernzomatic Power Cell
Take a close look at that label
A Bernzomatic Power Cell is 100% propane
That's propane baby!

But will it work with backpacking stoves?  Let's have a look.
The connector on a Bernzomatic Power Cell is a standard 7/16 UNEF threaded connector
That's a standard 7/16 UNEF threaded connector, the same one used by backpacking stoves.  Let's try it out.
A Snow Peak GS-100 stove on a Bernzomatic Power Cell
Well, I'll be danged.  Sure enough, it works.  But now you've got an upright type canister stove mounted on a long, slender bottle.  No way is that going to be stable.  We're back to impractical again. What to do?

Well, what if you could separate the burner from the bottle?  You can -- if you have something like a Brunton Stove Stand.
A GS-100 stove connected to a Bernzomatic Power Cell via a Brunton Stove Stand
Well, that's an improvement, but that canister is still a little on the tippy side.  Can't we just lay it down?
A Bernzomatic Power Cell laying on its side.
As a matter of fact, we can.  And, in case you can't see it in the above photo, that stove is on and in use.
 

Warning:  When you lay this canister on its side or turn the canister upside down, you are feeding liquid propane into your stove.  Burning liquid propane can be extremely dangerous.
To play it safe, you should follow the manufacturer's recommendations.  The manufacturer recommends that the canister always be used in the upright position.  See the full warning at the bottom of this post before you try laying the canister on its side or turning the canister upside down.
A close up of the flame of a GS-100 stove running on 100% propane from a Bernzomatic Power Cell
Now, I started with a completely full canister, so by putting the canister on its side, I should be getting liquid feed, the kind of feed you'd want to use in cold weather.  But, just to be sure, I leaned the canister up against the hillside.
A Bernzomatic Power Cell, completely inverted
And how does it work when completely inverted?  Just fine thanks.
A GS-100 stove running on liquid propane from a Bernzomatic Power Cell
The really interesting thing about these tests I ran with 100% propane is that I made absolutely no modifications to the stove or stove stand in any way, shape, or form.  In other words, I was able to run the stove on liquid propane (which is what you get when you invert the canister) without adding any pre-heating device.  I ran my tests in weather that was about 50F/10C air temperature.  In colder weather, a device to conduct heat from the flame to vaporize the fuel before it reaches the burner head may be needed.  At the temperatures I was operating in, the normal properties of propane were sufficient to vaporize the fuel.  I experienced no flaring.  I did allow the stove to warm up before inverting the canister.

There you have it, ladies and gentlemen, practical  propane for backpacking, the holy grail of cold weather canister stoves.  You saw it here first, on Adventures in Stoving.

OK, but now the bad news.  These are hard to find.  They are out there, and they do exist, but they aren't widely available.  But they're very worthwhile if you can find some.  It appears that Bernzomatic may no longer be making these, so once the existing supply is gone, that may be it.  Grab 'em while you can!
UPDATE 12 Jan 2012:  A thoughtful reader wrote Bernzomatic.  Bernzomatic has indeed discontinued the PowerCell (PC8).  The only such canisters available are the ones currently on shelves.  Once those are gone, no more will be available.

WARNING:  Any use of a fuel or a stove in a manner not recommended by the manufacturer may be dangerous or even deadly.  You may also void any warranty and/or nullify any legal protections you might otherwise have.  The preceding blog post shows techniques that are inherently dangerous.   Inverting the canister is against the manufacturer's recommendation.  Burning liquid propane can be extremely dangerous.  If you invert (turn upside down) the canister or lay the canister on its side, you will get liquid propane. Screw up here, and you may be cooking a lot more than your dinner, get it?
The author mentions these techniques solely because he believes that they might be of interest, but the author does not warrant in any way that these techniques are safe.  Indeed, these techniques are not safe and are by their very nature dangerous.  Use of these techniques may lead to property damage, great bodily harm, or even death.  The author does not recommend the techniques shown in this blog post.  If you decide to use the dangerous techniques shown in this blog, that is your decision, and you must accept that you have deliberately chosen to engage in a dangerous activity. 

HJ

Technical Appendix
Net weight:      226g/8oz of liquefied propane.
Gross weight:    365g/12.87oz (about 3/4lbs in other words)
Empty weight:    139g/4.90oz
Connector type:  Standard 7/16 UNEF threaded with a female Lindal type valve.
Manfucturer:     Bernzomatic
Stove stand:     142g/5.00oz

Monday, December 5, 2011

Gas in Extreme Cold: Yes or No?

OK, if you've read my previous blog posts, you know that remote canister gas stoves work pretty well down to 0°F/-18°C – if you run them with the canister upside down.  This assumes that you know and use good cold weather gas stove techniques.  And you'd better read up to understand just which gas stoves can be run with the canister upside down, because most of them can't.  See my article Stoves for Cold Weather II  (see also the list of related blog posts below).

What about below 0°F/-18°C?  Remember the three basic rules of gas stoves in cold weather:  choose good fuel, start with a warm canister, and keep the canister warm.  Those rules still apply, but in extreme cold, they become critical.  You must have a "warm" canister (generally about twenty degrees above the boiling point of your fuel) for your stove to work.  If things go seriously wrong on a backcountry trip and you can't warm that canister, you're in a world of hurt.

Hey, wait a minute.  So, why even bother with gas?  I mean if I can't warm up that canister, then I could die, right?

Yep, you could die.  That's not an exaggeration.  This is not something to take lightly.  But there are reasons to want to take gas in extreme cold. One reason is safety.  If you have to cook inside your shelter, gas is the safest option.  Yes, I know, stove manufacturers unanimously proclaim "never use a stove inside."  Let's see.  It's -5°F/-20°C.  It's blowing hard out there.  There's snow everywhere.  It's basically a white out.  You're going to go outside to cook? Really?  There comes a point in time where cooking inside is the lesser of two evils.  Cooking outside might mean certain death whereas cooking inside while risky is far safer.  Yes, you have to worry about fires.  Yes, you have to worry about Carbon Monoxide.  But you're a complete idiot if you try to cook outside in a howling gale when it's -5°F/-20°C out.

Back to my point about safety:  Gas stoves generally do not require priming.  If you know anything at all about priming a liquid fueled stove, you know flames can spring up several feet into the air.  Yes, with practice and care, you can keep the priming flames smaller.  In ideal conditions.  But if you come stumbling into your tent at night, half dead, half hypothermic, with hands about as nimble as a block of ice, just how controlled do you think that priming will be?  Priming inside a confined space with flammable items surrounding you is just not a good idea.  With gas, you just open the valve, light, and go.

Another issue is mechanical reliability.  Pumps on liquid fueled stoves can and do fail in extreme cold.  While the valve on a Gas canister can jam, jams are far less likely than on liquid fueled stoves, and the valve usually jams open.  In the case of a gas canister with the valve jammed open, just leave the stove attached to the canister.  Hardly ideal, but leaving the stove attached will allow you to use the stove's valve to hold back the gas – and you can still use the stove.

Now, even though I have called out liquid fuel pumps as having reliability problems in extreme cold, that is not to say that such pumps are unreliable per se.  In other words, most liquid fuel pumps will do fine, but failures do happen and they happen at a higher rate than with gas canisters.

Me personally?  I'd take both.  Yes, I am serious. I'd take a liquid fueled stove and a gas stove both if there were any way my team could reasonably manage it.  I'd take more than two stoves if the group were large enough to support it, even if I thought we could get by with less.  Gas will be safest if you have to cook inside, but if you get into a situation where you cannot warm the canister (a distinct possibility in extreme cold), you still have a liquid fueled stove. In extreme cold, it's time to quit counting grams and stay focused on coming back alive.

For your liquid fuel, use kerosene not white gasoline.  Kerosene is much  less likely to start a fire if there are any leaks or spills.  White gasoline is volatile stuff and really shouldn't be used inside unless you just don't have any other choice.  I'd also bring a spare fuel pump (or two) and expedition type maintenance kits and tools.  In extreme conditions, take extreme precautions.

In extreme cold, the real failure is the failure not to have everyone come back in one piece.

HJ

P.S.  OK, so maybe "bring both" is a little bit of a cop out.  If I absolutely had to choose only one stove for extreme cold weather, I'd probably go with kerosene.  But I really would seriously consider bringing both a liquid fueled and a liquid feed canister gas stove, especially for a group.  You just don't want to screw around when it gets that cold.


Related articles and posts:

Tuesday, November 29, 2011

Cold Weather Tips for Gas Stoves

OK, short and sweet, here are some practical tips for using (canister) gas in cold weather:
Peaks and snow, Sierra Nevada Mountains
First, choose good fuel.  Avoid "regular" butane and only use isobutane/propane blends.

Second, start with a warm canister. Keep the canister in your bag/quilt at night or in your inside jacket pocket (or something) during the day.

Third, keep the canister warm by placing the canister in water. If you chose good fuel in the first step, your fuel vaporizes at least at 11F/-12C. Liquid water will always be above 32F/0C -- that's about 20F/10C degrees above the vaporization point of the fuel. As long as that water stays liquid, you should have good canister pressure, even if the air temperature drops below the vaporization point of your fuel. It's the fuel temperature that matters, not the air temperature.  There are other ways to keep a canister warm which you can read about elsewhere, but water is safe and effective and is my preferred method.  WARNING:  Do not use hot water.  Tepid or even warm is fine, but hot water may cause your stove to flare.

Fourth, heat the canister if needed.  How can you tell if the canister needs more heat?  Poor performance.  If your stove's flame is insipid  in cold weather, try taking a spoonful or two at a time of hot water out of the pot and putting it into the water that the canister is sitting in.   Your performance should improve as the water gets hotter.  If performance does not improve even though the water the canister is sitting in is warm to the touch, there may be something else at issue such as low fuel level or a partial blockage in the jet.

Note:  If you want a detailed explanation of why this is so and what's going on behind the scenes, please refer to Gas Stoves: How Cold Can I Go?

That's it.  Choose good fuel, start with a warm canister, keep the canister warm,  and heat the canister if needed.  Happy cooking.  :)

HJ

Related articles and posts:

Monday, November 28, 2011

Gas Stoves: How Cold Can I Go?

Gas stoves (also called canister gas stoves) can struggle in cold weather.
Frozen lake and snow, Sierra Nevada Mountains
UPDATE, 17 December 2014:  I've almost completely re-written this article.  I've tried to talk more about the overall process of planning for cold weather trips.  I've also tried to talk about more than just the gas in a canister; I've added discussion of the practicalities of cold weather canister operation.  One should not rely on the gas alone but also on one's own planning and techniques.

So, how cold can I go with my gas stove?

Good question.  Do you want the short answer or the long answer?

The "Short" Answer
The short answer is that for the typical upright canister stove (that's the kind where the burner screws directly onto the canister), about 20°F/-7°C can be used as a rough planning number.  For a longer answer, see the appendix.  Understand though that the colder it gets, the more your stove will struggle even if it's warmer than my planning number.  Your stove will not work just as well at 20°F/-7°C as it will at 75°F/24°C, at least not without planning and intervention on your part. You will need to know the basics of cold weather gas stove operation which are:
  • Choose good fuel.  See What's the Best Gas for Cold Weather?
  • Start with a warm canister.  Keep the canister in your sleeping bag with you before breakfast, put the canister under your clothing before supper, etc.
  • Keep the canister warm. Put some insulation under the canister (closed cell foam works well), protect the stove from wind, and put the canister in a bowl of (liquid!) water.
  • Heat the canister if needed. How can you tell if you need to heat the canister?  Poor performance.  If your flame is insipid in cold weather, you need to (carefully! slowly!) heat the canister.  See my Stoves For Cold Weather article in Seattle Backpackers Magazine for some ideas on how to heat the canister.  
Now, I've described 20°F/-7°C as a rough planning number.  What do I mean by that?  Well, if you follow the basics of cold weather gas stove operation (select good gas, start with a warm canister, keep the canister warm, and heat the canister if needed) and use your head, it shouldn't be too difficult to keep an upright gas stove going in temperatures at or above the planning number.  If you look at a weather forecast for the area and elevation in which you intend to use your stove, you should be able to get some idea of what temperatures you can expect.  If the temperatures are well above 20°F/-7°C, you might plan to bring an upright canister stove. If the temperatures are forecast to be close to or below 20°F/-7°C, you might plan on bringing something else.  For some alternatives, read the Alternatives for Colder Weather section of this article.

Note that 20°F/-7°C isn't carved in stone anywhere.  This is just my fairly conservative rough planning number.  Particularly with a fresh canister, you might be able to go colder.  You may also get some cold weather performance increases at higher elevations where the boiling point of the fuel is lower.  More on that in the appendix if you're interested.  Note that this "planning number" is but one part of the overall planning process.  There are many factors that should be considered when choosing gear for a particular trip, and this planning number is just one of them.  My "planning number" is meant to be incorporated into one's overall planning process.  It is not intended to trump the planning process.

Warning
I've said that the canister needs to be heated in cold weather in order to get good performance from a canister gas stove, but NEVER OVERHEAT A CANISTER.  If the canister feels so hot to your bare hand that it's painful, that's too hot.  Take IMMEDIATE action to reduce the heating of the canister.  Overheating a canister can do a number of bad things including causing the canister to explode.
Crags and peaks, Sierra Nevada Mountains

Alternatives for Colder Weather
If you need to go colder than 20°F/-7°C, you have a couple of options.  One is to switch from a canister gas stove to a liquid fueled stove, that is a stove fueled by white gasoline or kerosene (or similar).   That's certainly a pretty tried and true approach.

But many people either don't feel comfortable with or don't want to hassle with liquid fueled stoves.  In particular, many people are intimidated by having to prime a liquid fueled stove.  Are there any options for canister gas in temperatures lower than my rough planning number of 20°F/-7°C?  Well, if you want to use canister gas, you might want to bring a stove that can handle liquid feed gas, a remote canister stove with the canister inverted in other words.  See my article, Stoves for Cold Weather II, for more information on liquid feed gas.  With liquid feed gas stoves, one can use gas in colder temperatures, something on the order of 20 Fahrenheit/11 Celsius degrees colder than upright canister stoves – if you use your head and follow the basics of cold weather gas stove operation.  My rough planning number for upright canister stoves is 20°F/-7°C and inverted canisters stoves have roughly a 20 Fahrenheit/11 Celsius degree advantage over upright stoves, therefore I use 0°F/-18°C as the rough planning number for inverted canister stoves.

Note that even with liquid feed gas, one still needs to have some pressure in the canister to drive the process.  Therefore you must keep the canister "warm" relative to the outside environment.  Placing the canister in water is a safe way to keep the canister warm.  Water freezes at 32°F/0°C, so, as long as the water is liquid, your canister will be warmer than 32°F/0°C.  Keeping the canister above 32°F/0°C should give you more than enough canister pressure to run your stove.

The planning numbers I suggest are guidelines for reducing risk; there are no guarantees in the back country.  The planning numbers I suggest are temperatures in which you should be able to keep your fuel sufficiently warm to operate a canister gas stove.  Keeping the canister warm requires intervention on your part.  Note however that "stuff happens."  If temperatures drop, if winds pick up, or if you are exhausted or injured, you may not be able to keep your fuel warm.  You must be prepared to handle these and any other unexpected changes or emergencies that may occur.  These planning numbers cannot be used alone.  You must engage in proper planning, bring the proper equipment, and you must know and use the basics of cold weather canister operation.

Finally, the colder you go, the harder it is to keep the gas warm in a canister.  If you're going out in really cold weather, ask yourself:  "Can I really keep the canister warm?"  In cold weather, an abundance of caution is the best advice I can give you.

HJ


Appendix – The "Long" Answer
So, what am I basing my planning numbers on?  Well, let's talk a little bit, at a high level, about the chemistry of canister gas.  If this gets too boring or confusing or if you disagree or you just plain don't like what I've written, I commend to you a much simpler approach in Cold Weather Tips for Gas Stoves.

Now for the "long" answer:  Canisters for backpacking typically contain propane mixed with either isobutane or "plain" butane (n-butane).  The boiling points (vaporization points) at sea level of each of these gases are as follows:
 Boiling Point
n-butane    -0.5°C    31°F
isobutane    -12°C    11°F
propane      -42°C   -44°F

When you blend the fuels together, your boiling point will be somewhere in between the boiling point of the various fuels.  Calculating the exact boiling point is not trivial.  Not only that, but the proportions of the fuel mix will change over time with an upright canister stove.  Why will the mix change over time?  If the canister is used in the normal, upright position, the propane will boil off at a faster rate than either n-butane or isobutane because if its higher vapor pressure.  Since the propane is boiling off faster, there will be less and less propane in the mix over time.  As the percentage that is propane declines, the boiling point rises.

OK, so why all this blather about boiling points?  Well, the boiling point is the temperature at which your fuel will turn to vapor, i.e. change from liquid to gas.  Canister gas stoves require gas to operate, but that's a liquid inside your canister.  Just shake the canister if you don't believe me.  That's a liquid in there.  The fuel inside the canister is under such high pressure that the gas liquefies (turns into a liquid).  In order to run a canister gas stove, that fuel has to vaporize.  In order to vaporize, the fuel must boil.  If the fuel temperature is lower than the boiling point, it won't vaporize, and your stove won't run.  For canister gas stoves in cold weather, we want the lowest boiling point possible so that the fuel will turn to gas so that we can run our stove.  We must then keep our canister warmer than the boiling point of the fuel.

Well, OK, if the propane is burning off and the boiling point is constantly changing, how the heck can I figure out how warm I have to keep the canister!?  Well, toward the end of a canister, all of your propane will have burned off, and you will just have the fuel with the highest boiling point remaining (either isobutane or n-butane).  Therefore the boiling point of your fuel will never be higher than the boiling point of the fuel that remains at the end of a canister.  All we have to do now is keep the fuel temperature is above the boiling point of the worst cold weather performing fuel.  Isobutane boils at 11°F/-12°C; n-butane boils at 31°F/-0.5°C.  Isobutane therefore is a much better fuel in cold weather.  This is why I stress that one should avoid n-butane and only purchase fuels containing isobutane and propane for cold weather use.

I've just described in the preceding paragraph how the propane burns off more quickly when the canister is used in upright mode.  If you read the "Alternatives for Colder Weather" section, I talk about using a stove that can handle the canister in inverted (upside down) mode.  One of the advantages of using a canister in inverted mode is that your fuel mixture doesn't change much over time.  Since you're pulling liquid off the bottom instead of gas off the top, it doesn't matter which fuel boils at what rate so long as there's enough boiling to produce sufficient canister pressure.  Since you're not losing your propane (your best cold weather fuel), your boiling point stays low.  Remember, you want the lowest boiling point fuel for cold weather.

Now there's another matter:  Canister pressure.  Just being above the boiling point isn't necessarily enough.  If our fuel boils at 31°F/-0.5°C, and the fuel temperature is 32°F/0°C, then it's not going to boil very vigorously, and we're really not going to have enough pressure to run a stove properly.  To illustrate this, think of the "chattering" lid on a pot of boiling water.  If the water is just barely boiling, the lid is quiet.  But if you turn up the heat, the water will start boiling vigorously, producing enough steam to literally lift the lid for a moment.  The lifting (as the pressure builds up) and falling (after the pressure is released) is what causes the noise of a "chattering" lid on a pot of boiling water.  In order to run a stove, you want the fuel temperature to be high enough to produce a vigorous boil.  How high above the boiling point does the fuel temperature have to be to have enough pressure to properly run a stove?  Well, I suppose it depends on your definition of "properly" (as well as some external factors like atmospheric pressure and temperature), but the bottom line is that if you turn on the stove and the flame isn't strong enough to cook with, then the fuel is most likely too cold and you may have to warm the canister.  If you want numbers, if the fuel temperature is 20°F/7°C degrees above the boiling point of the worst performing fuel, then generally you should have good canister pressure.  The performance of your stove, however, is the bottom line as to whether or not your fuel is warm enough.  Caution:  If you heat the canister, and performance doesn't improve, think.  Could there be some other problem, for example, a blockage in the jet or an empty canister?  If you keep adding heat and performance doesn't improve, there's something else going on.  Never heat the canister to the degree that the canister feels painfully hot.

And there's yet another issue:  Canisters get colder as you operate the stove, through the process of evaporative cooling.  Canisters cool from within and get colder than their surroundings.  Take a look at the below photo.
Ice forming on the lower portion of a canister in cold but not freezing weather
That's ice forming on the sides of the canister even though the temperature is not below freezing.  Why?  Because as I use the gas, evaporative cooling occurs, and the canister gets colder than its surroundings.  So starting with a canister that is warm enough in the beginning is no guarantee that the canister will stay warm enough throughout the time that you are cooking.  This is why I suggest heating the canister if needed.  Heating the canister counteracts the effects of internal canister cooling as well as cooling due to heat lost to the environment.  Here's another advantage to using stoves with the canister inverted:  the canister doesn't cool from within to the same degree as a canister does when you use it upright.  Thus, there are two advantages to using the canister upside down (if your stove will support it!):
1.  Your propane won't be leaving the mix.
2.  Your canister won't get as cold.
More propane + warmer canister = better pressure.  Inverted canister stoves are definitely superior for cold weather.

Now, another complication, but this one generally works in our favor:  As you ascend, the higher you go, the lower the atmospheric pressure.  As the atmospheric pressure drops, so does the boiling point of your fuel.  Generally, the drop is about 1.8 degrees Fahrenheit for every thousand feet in elevation gained.  In metric units, that's about 1.0 degrees Celsius colder for every 300 meters in elevation gained.  Note the use of the word "about."  The actual values are slightly higher, particularly above 10,000'/3000 m, but I'm going to be conservative here.  I'll say more about why in a moment.  Take a look at the below chart.
A chart showing:
The relationship between boiling point and elevation for isobutane, navy blue line, 
Temperature vs. elevation for an internal canister pressure of 5 psi gauge (psig) for isobutane, red line.
Temperature vs. elevation for an internal canister pressure of 10 psi gauge (psig) for isobutane, gold line.
The relationship between the freezing point of water and elevation, green line.
Values are illustrative not exact.
The navy blue line shows how the boiling point gets lower as elevation increases.  Now, of course it's atmospheric pressure that's the real issue, but since atmospheric pressure declines relative to elevation at a fairly steady rate over the interval shown here, I show elevation.  In reality atmospheric pressure varies not only with elevation but also with conditions, and the change relative to elevation is not really linear (but it's close).  The chart is a simplification of what's really going on.  But recall that we're just after a rough planning number, a planning number that will be incorporated into our overall trip planning process, not a number that will override all else, so this chart is sufficient for our purposes.

OK, now why do I only use 1.8 degrees Fahrenheit per 1000 feet in elevation gain (about 1.0 C per 300 m) even though the actual change in boiling point is (slightly) greater?  Well, let's look at the red and gold lines on the above chart.  The red and gold lines illustrate what we're really after:  Canister pressure. Notice that the red and gold lines are not parallel to the navy blue line.  As it happens, the pressure inside a canister is lower in cold even if we're the same number of degrees above the boiling point.   In colder temperatures, the fuel temperature must be higher above the boiling point to produce the same internal canister pressure.  Notice how the red lines and gold lines get progressively farther away from the navy blue line.  The red and gold lines represent a constant pressure (5 psig and 10 psig, respectively).  In order to maintain a constant pressure, the red and gold lines get progressively farther away (more heat required) from the navy blue line as temperatures get colder.   Note that these lines are not exact; in fact I've exaggerated them slightly for illustrative purposes. Also, the actual functions are not linear in progression (but they're close).  We're not planning a Mars mission here.  We just need a rough planning number.  Approximating the true, non-linear progression with a linear one will get us in the ballpark.
An MSR Reactor operating at over 23,000 feet/7000 meters elevation on Muztagh Ata (24636'/7509m) in far western China. Overnight lows approached -40°F (which is also -40°C; the scales are equal at -40°). One person died on the mountain during this expedition.  It was cold.  Note that the canister is labeled "Isobutane" on the side.
Photo credit: Reuben Brimfield
Another note:  You can't out climb low canister pressure.  Some people have jumped to the conclusion that I'm saying "just keep climbing to the elevation where the boiling point is so low that your stove will start working."  Uh, no.  Temperatures fall faster than boiling points.  In other words, as you climb, it's going to get colder faster than the elevation change will improve your stove's performance.  The proper thing to do is to get a good understanding of the temperatures you'll be facing on a given outing and be prepared for them.  Don't try to climb to improve your stove's performance.

Now, look at the green line.  This represents the freezing point of water.  Note that the line is flat.  The freezing point of water does not vary with elevation the way that the boiling point of our fuel does.  Any liquid water will generally be warmer than the temperature that the green line represents.  Yes, the presence of certain minerals can change the freezing point of water, but for the purposes of our rough planning number, we will assume that any water that is liquid will be warmer than the green line.  Note that the green line is almost always above the gold line.  In other words, if we put a canister in water, you should have good canister pressure, so long as the water remains liquid.  I'm assuming here that you followed the other basics of cold weather canister operation as well.  This is the beauty of using water as a method of heating the canister.  By the mere fact that the water is liquid, we generally will have enough pressure with which to cook.  However, if you're not getting the performance you need, you should be prepared to take action.  One action might be to take some water out of the pot that you're heating and put it into the bowl that the canister sits in.  Don't get it too hot!  If you add just a touch of warmer water (slowly!) to the water that is already in the bowl, you will bring the water temperature up a bit and increase your stove's performance.  There are other ways to heat the canister, but liquid water is pretty safe so long as the canister never feels hot to the point of pain to the (unfrozen) bare hand.

Of course you can modify the stove to divert heat to the canister from the flame directly instead of using water, but there are risks in doing so. Be very careful.  Overheated canisters can and do explode.  A canister explosion is a potentially life threatening event.  ALWAYS  monitor the canister temperature with your (unfrozen) hand.  If the canister feels hot to the touch, turn it down immediately. 

Now you may be thinking, "if I can heat the canister, what's up with these planning numbers you keep talking about?  Shouldn't I be able to go as cold as I want so long as I keep the canister warm?"   Well, yes you can.  My planning numbers are an attempt to be conservative and thereby reduce risk (reduce, not eliminate).  The colder it gets, the harder it is to keep the canister warm.  If you're going out in really cold weather with a gas stove, think.  Can you really keep your canister warm in those temperatures?  What happens if the temperature is colder than you expected?  Can you compensate?  In really cold weather, your life may depend on your stove functioning.  Take no short cuts.

Summary:
1.  If you use a canister right side up, the best cold weather fuel, propane, boils off at a faster rate, so you must be able to rely on the other components of your fuel.  Therefore choose isobutane and avoid n-butane.
2.  If you use a canister upside down (inverted), the propane stays in the mix and your fuel has better cold weather performance.  Most stoves cannot handle inverted operation.  Do your homework before trying this.
3.  If used upright, canisters experience significant cooling from within.  Therefore, it is the fuel temperature which matters, not the ambient temperature.  Your fuel temperature will be usually be colder than the surroundings after operating the stove for a while.
4.  If you use a canister upside down, the canister will not experience cooling (well, at least not to the degree that it does in upright operation).
5.  In order to have enough pressure to properly operate a stove, your fuel temperature must be warmer than the vaporization point (boiling point) of the fuel.  Generally, about 20°F/11°C degrees above the vaporization point will give you good operating pressure, but the actual performance of the stove is the bottom line.  Poor performance probably means that your fuel needs more heat.  Therefore you must be able to heat the canister.  Water is typically a safe way to heat the canister.
6.  NEVER heat a canister to the degree that it is painfully hot to the touch of an (unfrozen) bare hand.
7.  The higher you go, the colder the weather your gas stove will operate in, but the colder it gets, the harder it is to keep the canister warm, irrespective of elevation.  As you climb, temperatures fall faster than the performance of your stove increases.  You cannot out climb cold.
8.  If you heat the canister, you are not as constrained by the ambient temperature.  However common sense still applies here.  Can you realistically keep the canister warm enough in the temperatures expected?  What happens if the weather is colder than expected? What happens if a storm moves in?
9.  You must know and use the basics of cold weather canister operation (select good fuel, start with a warm canister, keep the canister warm, and heat the canister if needed). You must also be prepared for emergencies and the unexpected.



    Related articles and posts:

      Friday, November 25, 2011

      What's the Best Brand of Gas for Cold Weather?

      For warm weather (above 50°F/10°C), it doesn't much matter what brand of gas you buy.

      Caution!
      The one exception to the above is Coleman gas canisters. At least for the Coleman canisters with the orange label, Coleman canisters do not work consistently with many brands of stoves.  You can however use Coleman canisters which are very cheap at Walmart to refill other canisters.  See:  Refilling Backpacking Canisters II.


      NOTE:  This post was last updated on 11 April 2017.


      For cold weather, the brand of gas you buy does make a difference.  Typically, gas canisters contain some blend of propane mixed with either "plain" butane (n-butane) or isobutane. Some canister brands contain all three gasses.  For cold weather use, you generally want a canister with as little n-butane as possible.  Even though propane is the best cold weather gas, I'd take a canister with 10% propane and 90% isobutane over a canister with 30% propane and 70% n-butane.  Why?  Because the propane will burn off at a faster rate than the n-butane, leaving you with nothing but n-butane toward the end of your canister.  Butane is a poor performer in cold weather.
      Frozen lakes and snow, Sierra Nevada Mountains, June 2014
      Why is butane a poor cold weather performer?  Why do we use blended gas?  Why don't we just use 100% propane?  That's all covered in my post on Gas Blends and Cold Weather Performance.

      How can we cope with cold weather?  For more info on canister stoves in cold weather, see:  Gas Stoves in Cold Weather – Regulator Valves and Inverted Canisters
      A frozen lake, Sierra Nevada Mountains, June 2014
      What companies have got the best blend?  I don't have all the data, but here below is what I have.  This data is for the United States of America.  Brands and blends available elsewhere may vary.

      GOOD WINTER GAS BRANDS:
      • Olicamp Rocketfuel is the best cold weather blend available in North America – at least based on the label.  It has 75% isobutane and 25% propane.  It's performance will not be radically better than an 80/20 mix, but Olicamp's 75/25 is a slightly better mix – if it is pure.  Any time there is isobutane, there will always be a certain percentage of plain n-butane present as well.  Here, quality control is essential.  How committed is Olicamp to quality control?  I don't know, but generally Olicamp Rocket Fuel's reputation is good.  Olicamp specifically advertises their blend, so they are clearly aware of the implications of the mix and are marketing it on that basis.
      • MSR is a good winter blend, 80% isobutane and 20% propane.  These numbers are confirmed on MSR's website.  MSR is pretty committed to the climbing and mountaineering community.  They are pretty committed to quality control.  I tend to trust MSR's numbers and believe that they have very low percentages of n-butane.  I generally go with MSR on my cold weather trips.  Your mileage may vary.
      • Snow Peak is 85% isobutane and 15% propane.  These numbers are confirmed on Snow Peak's website.  I tend to trust Snow Peak's numbers more since they are willing to commit to them in writing.  This mix isn't quite as good as Olicamp's or MSR's but is still a reasonably good mix.
      BRANDS OF UNKNOWN QUALITY (in no particular order):
      • Jetboil is supposedly 80% isobutane and 20% propane.  Possibly.  I have not been able to confirm these numbers.  How much n-butane does it contain?  I don't know.   No where will Jetboil put down in writing what their actual numbers are.  This tells me that their blend varies a lot.  Jetboil wouldn't be my first choice simply because Jetboil will not commit, in writing, to any set of numbers.  My understanding is that they can have more than 5% n-butane and still advertise that their mix as "isobutane" so long as it's mostly isobutane.
      • Brunton is reputedly an 80/20 mix.  Maybe.  I have not been able to confirm these numbers.  Brunton's reputation isn't that good in cold weather.  They may have a relatively high percentage of n-butane (which again they can advertise as isobutane so long as the majority of the butane is isobutane).  Brunton would not be my first choice since they won't commit to a particular blend.
      • Sterno is an isobutane mix according to the label on their cans.  What is the mix?  Unknown.  How much n-butane does their "isobutane" mix contain?  Unknown.  If nothing else were available, I guess you could go with it, but I myself would probably go with a brand that will commit to a certain set of numbers.
      • GSI, likewise, is an isobutane mix according to the label on their cans.  What is the mix?  Unknown.  How much n-butane does their "isobutane" mix contain?  Unknown.  If nothing else were available, I guess you could go with it.  I'd rather have a commitment, but sometimes you don't have every brand available at a given location.  I'd go with an "unknown" like GSI over a known mix if the known mix were labeled as containing n-butane.

        BRANDS NOT RECOMMENDED* FOR WINTER USE (in no particular order)
        • Coleman regular threaded canisters (not Powermax) are 30% propane and 70% butane.  These numbers on on the side of the canister.
        • Primus is 25 % propane, 25 % isobutane, and 50 % butane per their website.  I suppose it's better than Coleman brand, but I'd still rather have a fuel with no regular butane at all.  Note that this is their "regular" mix.  They do have a winter mix and a summer mix.  Definitely don't use the summer mix for cold weather!  The winter mix may be good, but I haven't been able to track down any numbers.
        • Optimus brand is 25% propane, 75% butane, as printed on the side of the canister.  Since it contains regular butane, I wouldn't use it in cold weather.
        • Glowmaster is 20% propane and 80% butane per the side of the canister. 

        One caveat to the above:  If you're using standard threaded canisters in liquid feed mode (in other words, the canister is used upside down) or you're using a canister that is designed for liquid feed (e.g. a Powermax canister), the n-butane vs. isobutane issue matters less, although I would still generally prefer isobutane had I a choice.  In liquid feed mode, the liquefied gas stays blended and all of the fuels burn together at a constant rate.  With liquid feed, the propane does not burn off more quickly, and you're not left holding the bag with nothing but crummy (in cold weather) n-butane left.  In other words, with liquid feed, "regular" butane isn't such a bad thing provided that you've got plenty of propane content.

        For "normal" (canister right side up) use, avoid "regular" butane for cold weather.

        HJ

        *Because they contain "regular" butane, a very poor fuel in cold weather.

        Related articles and posts: